Sound frequency
Sound (or audio) frequency is the speed of the sound’s vibration which determines the pitch of the sound. Sound is caused by vibrations that transmit through a medium such as air and reach the ear or some other form of detecting device.
It is measured as the number of wave cycles that occur in one second, with the standard unit of measurement being Hertz (Hz)
Sound intensity is measured in Decibels (dB). This is a logarithmic scale in which an increase of 10 dB gives an apparent doubling of loudness.
A frequency of 1 Hz refers to one wave cycle per second, while 20 Hz refers to 20 per second, where the cycles are 20 times shorter and closer together.
The audio spectrum is the frequency range that is audible to humans. This generally spans from 20 to 20,000 Hz, although environmental factors influence the precise range for each individual.
Frequencies at the high end of the spectrum are the first to be negatively affected by age and/or hearing damage as a result of prolonged exposure to loud volumes or noise.
As well as intensity and frequency, sound also transmits information. For example, music or speech, transmit the information which people may perceive differently from other sounds.
Approved document E, Resistance to the passage of sound defines ‘frequency’ as:
The number of pressure variations (or cycles) per second that gives a sound its distinctive tone. The unit of frequency is the Hertz (Hz (formerly called ‘cycles per second’).
A ‘frequency band’ is a continuous range of frequencies between stated upper and lower limits. An ‘octave band’ is a frequency band in which the upper limit of the band is twice the frequency of the lower limit. A ‘one-third octave band’ is a frequency band in which the upper limit of the band is 2 times the frequency of the lower limit.
The sound-absorbing characteristics of materials vary significantly with frequency. Low-frequency sounds, below 500 Hz, tend to be more difficult to absorb whereas high frequencies sounds, above 500 Hz, are easier to absorb. A material's sound absorbing properties can be expressed by the sound absorption coefficient, alpha, as a function of frequency, where alpha ranges from 0 (total reflection) to 1.00 (total absorption).
Similarly, the sound insulation of materials varies with frequency. Low-frequency sounds tend to be attenuated less by passing through sound insulating materials than high-frequency sounds. As a result, the sound attenuation properties of materials are generally measured at a range of frequencies representative of normal human hearing and this is then compared to a reference frequency profile such as that defined in BS EN ISO 717-1 Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation.
[edit] Related articles on Designing Buildings Wiki
- Acoustic consultant.
- Airborne sound.
- Approved Document E.
- Building acoustics
- Building Bulletin 93: acoustic design of schools.
- Building regulations.
- Flanking sound.
- Impact sound.
- Noise nuisance.
- Reverberation.
- Robust details certification scheme.
- Room acoustics.
- Sound absorption.
- Sound insulation.
- Sound power level.
- Sound reduction index (SRI).
- Sound v noise.
- Structure-borne sound.
Featured articles and news
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.