Power surge

Revision as of 16:04, 11 December 2022

A power surge is when, for a short period and unusually high voltage occurs in an electrical system or systems. It may also be referred to as a transient surge because it involves a transient wave of voltage, current or power which usually occurs between the normal waves of voltage. The over voltage can be additive or subtractive with positive or negative polarity lasting less than a half-cycle, or at little as 50 microseconds but surges can reach 6000 Volts and 3000Amps which can cause damage.

Power surges often occur after power cuts or blackouts where a surge in power is likely to occurs as systems are reinstalled or turned on again. Lightening strikes can cause power cuts but can also cause power surges as the systems absorb the excess electrical power of the lightening strike, which can damage equipment plugged into the circuit. Other common causes of power surges are from faulty wiring and when systems are overloaded or drawing too much power.

Occurrences where systems draw to much power can be localised to individual dwellings where for example to many pieces of equipment are plugged into the same socket, drawing too much power which can cause damage or in some cases fire. These events can also occur on a wider scale such as for example during what is known as TV pickup, which describes the phenomenon of many people unintentionally demand power at the same time which migth happen during commercial TV breaks when brits all put the kettle on. One example of this occurred at the end of the FIFA World Cup semi-final after a penalty shoot-out between England v West Germany in 1990 when the UK demand at that point was 2800 megawatts.

Common methods exist to deal with power surges, some of which are designing into or recommended by most building regulations such as lightening protection systems which aim to earth any excess power from a lightening bolt safely to the ground rather than through an electrical system. Other practical measures to avoid damage to individual equipment during a power surge that occurs after a power cut ( or during a storm with likely lightening bolts) is to physically unplug equipment from those circuit, thus removing the risk to individual appliances.