Loft Insulation
Loft insulation normally refers to insulation that is required in a cold roofs, that is insulation installed horizontally between and on top of roof or ceiling beams, not insulation installed between and on top of the roof structure and rafters (a warm roof).
In a cold roof the air space above the ceiling joists is ventilated and therefore cold, without insulation between it and the warm house below there is significant risk of the warm moist air from the living spaces rising and then cooling quickly on the cold surfaces of the roof space and condensing. This can introduce moisture on the surfaces of the roof structure which can in turn lead to mould, and decay over long periods.
Introducing one or more layers of insulation between these spaces reduces heat loss and reduces the risks of condensation, preventing warm moist air from entering directly into the loft space.
The first building regulations on home insulation were issued in 1965 and required just 28mm of insulation for a loft, today this is recommended as at least 250 up to 300mm.
[edit] Related articles on Designing Buildings
- Approved Document F.
- Cold bridge.
- Condensation pipework.
- Damp.
- Damp proofing.
- Dehumidification.
- Designing out unintended consequences when applying solid wall insulation FB 79.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Dry-bulb temperature.
- Electrical resistance meters.
- Flashing.
- Humidification.
- Humidity.
- Hygrothermal.
- Interstitial condensation.
- Methodology for moisture investigations in traditional buildings.
- Moisture.
- Moisture content.
- Mould growth.
- Penetrating damp.
- Psychometric chart.
- Rising damp.
- Sling psychrometer.
- Spalling.
- Treating brickwork with sealant or water repellent.
- Water vapour.
- Wet-bulb temperature.
- Blue roof.
- Condensation in buildings.
- Domestic roofs.
- Flat roof.
- Flat roof defects.
- Interstitial condensation.
- Inverted roof.
- Roofing defects.
- Thermal bridging in buildings.
- Thermal comfort.
- Warm roof.
- Cold roof
Featured articles and news
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.